Starting a fire in a fireplace is relatively easy. There are a few key steps that are worth noting though if you want to know how to start a fire in a fireplace. The first step is to find a suitable piece of fuel. You will need a variety of logs that range in size and quality. Once you have decided on the right wood, you can build your fire.
A fireplace can be a great way to enjoy the warmth of the winter season. But before you start to light a fire, you will need to make sure your home is airtight. If you do not have an airtight fireplace, you may want to consider opening a window in the same room. This will help prevent the fire from drawing warm air from other parts of your home.
You will also need a fire starter. These are devices that include lighters, tongs, or a gas powered device that can be used to ignite a log or a small stack of dry wood. However, you should always remember to keep your flames away from children or pets. Keeping a metal bucket near your firebox is a good idea. Alternatively, you can use a heavy duty fireplace poker to spread the coals underneath the grate.
Next, you will need to find some kindling. Small pieces of dry wood that are about the length of your pinky are considered kindling. They will burn for a long time, and you can use them to build up the fire.
Once you have found your kindling, you will need to light it. To do this, you can place a ball of newspaper on top. This will allow for air to move through the newspaper, which can then light the larger pieces of kindling that you have placed on top.
Once the newspaper has lit, you should then add some kindling to the logs. These can be tiny twigs, yard trimmings, or even paper. Newspaper balls can be pushed into the grate or crumpled into light bundles. Place these on top of the logs and if necessary, lay a few newspapers down on the grate.
Finally, you should build up a layer of firewood that is not as large as the last layer. This will provide enough heat to get the fire started while also creating a fire barrier that will prevent sparks from flying out and burning the surrounding area. Adding smaller logs can actually smother the fire. Ideally, you should start with a single log that is about half the diameter of your forearm and work your way up.
Another good option for starting a fire in your fireplace is to build up a triangle of wood. Each side should be about half the height of the grate. Your next layer should be about as wide as the middle of the triangle.
You should also have a fireplace screen to keep sparks from flying out. An air vent is another handy piece of equipment to have. It is important to note that you should never open the damper while the fire is active. Depending on your fireplace, you may be able to use a latch or a chain to release the damper.